Marble / Cementitious terrazzo / Limestone

Dry grinding

An initial application of a thin layer of self-levelling compound over the tiles protects the sensitive edges during surface leveling, at the same time as it enables use of our highly efficient metal tools.

STEP GRIT TOOL TYPE TOOL NAME
APPLY SCREED ON SURFACE BEFORE START
1 25/30 Metal EZ H 25 DS
2 50 Metal EZ H 50 DS
3 50 Resin* EX D 50
4 100 Resin* EX D 100
5 200 Resin* EX D 200
6 400 Resin* EX D 400
7 800 Resin* EX D 800
8 3000 Resin* EX D 3000
9 PREMIUM GUARD**

*) Use a flexible tool holder/Velcro or EZchange™ CLICK.
**) Optional
Natural Stone and Cementitious Terrazzo can also be treated with our stain protection system PREMIUM GUARD, if wanted.

Wet grinding

Initial grinding using SGW rings requires a grinder equipped with the "cross-attachment system" on the grind holder.

STEP GRIT TOOL TYPE TOOL NAME
1 25 Metal SGW 25
2 50 Metal SGW 50
3 100 Metal SGW 100
4 TRANSITION PADS FOR WET GRINDING
5 200 Resin* EFT W 200
6 POLISHING PADS FOR WET GRINDING
7 400 Resin* EF W 400
8 800 Resin* EF W 800
9 1500 Resin* EF W 1500
10 3000 Resin* EF W 3000
11 PREMIUM GUARD**

*) Use a flexible tool holder/Velcro or EZchange™ CLICK.
**) Optional
Natural Stone and Cementitious Terrazzo can also be treated with our stain protection system PREMIUM GUARD, if wanted.

Epoxy Terrazzo

Wet grinding

Cement based design floors or cementitious toppings can also be treated with our stain protection system PREMIUM GUARD, if wanted.

STEP GRIT TOOL TYPE TOOL NAME
1 30 Metal EZ H 30 DS
2 50 Metal EZ H 50DS
3 50 Resin* EFT W 50
4 EPOXY GROUTING**
5 100 Resin* EFT W 100
6 200 Resin* EFT W 200
7 400 Resin* EF W 400

*) Use a flexible tool holder/Velcro or EZchange™ CLICK
**) Use a grouting suited for the specific epoxy system. (Not provided by Husqvarna)

Design floors or Cementitious toppings

Dry grinding

Adapt tool choice to maximize efficiency and wear rate on the material you work with.

STEP GRIT TOOL TYPE FLOOR TREATMENT
1 25/30 Metal EZ M 25 DS
2 50 Metal EZ M 50 DS
3 50 Resin* VF D 50
4 100 Resin* VF D 100
5 200 Resin* VF D 200
6 PREMIUM GUARD**

*) Use a flexible tool holder/Velcro or EZchange™ CLICK.
**) Optional
Cement based design floors or cementitious toppings can also be treated with our stain protection system PREMIUM GUARD, if wanted.

 

Wood grinding

SL 50 or SL 30 can be used to remove old varnish, lacquer, oil or unevenness from the floor. These tools should always be used with flexible tool holders. When the wood floor is flat and clean continue with sandpapers. Sandpapers are attached on Foamflex pads, which should always be mounted on Velcro holders.

STEP GRIT TOOL TYPE TOOL NAME
1 50 Metal EZ SL
2 40 Sandpaper VS D 40*
3 60 Sandpaper VS D 60*
4 80 Sandpaper VS D 80*
5 100 Sandpaper VS D 100*
6 120 Sandpaper VS D 120*

*) Use Tool holder "Velcro Short hook" along with also a Foamflex pads to avoid heat building up