Husqvarna DM 280 | Husqvarna ZA

1/13

Product Description

Electric core drill for use with stand. The DM 280 is an ideal choice for medium core drilling up to 350 mm diameter. The motor is very easy to operate and features several ergonomic features facilitating drilling and set up. Suitable for water evacuation, ventilation, angle drilling and stitch drilling.

Discover all features and learn more about the benefits

Showing {featureCount} features

Drill with maximum pressure
A LED indicator shows the load of the machine, allowing you to always drill at maximum pressure.
Durable and ergonomic design
Durable and shock-proof, designed to protect the electronics. Easy to carry and install thanks to low weight and ergonomic design.
Reliable gearbox
Watercooled 3 speed gearbox for optimal drilling performance and longer service intervals.
Easy start with reduced speed
To facilitate making a starter hole, speed is reduced by half using the Smart Start® button.
Elgard™
The machine uses pulsation to warn you of an approaching overload. This increases productivity and extends product life.
Load indicator
The LED indicator shows the load of the machine, allowing the operator to always drill at maximum pressure, for best performance.
Softstart™
An electronic current limiter for soft starts with normal fuses. This gives you a smooth start with high productivity.
Angle drilling
Drilling holes in stepless adjustable angles.
Barriers
Drilling for installation of stair rails, fences, etc.
Horizontal drilling
Drilling horizontally.
Stitch drilling
Drilling multiple holes next to each other to make openings.
Water evacuation
Drilling for water evacuation.
Vertical drilling
Drilling upwards and downwards.
Channels, pipes and cables
Drilling ventilation channels and holes for pipes and cables.

Get full product details and all technical specifications

Top specifications

Power sourceCorded

Rated input power2,7 kW

Weight (complete product w/o side packed articles)13 kg

Drill bit diameter with stand, max350 mm

Selection of Diamond tools that fits this model

Bronze

Diamond core drill bits

TACTI-DRILL™ D20

{variantCount} variants

162 – 300 mm

Drill connection

Silver

Vari-Drill D 20

Diamond core drill bits

VARI-DRILL™ D20

{variantCount} variants

16 – 300 mm

Drill connection

Silver

Vari-Drill D 65

Diamond core drill bits

VARI-DRILL™ D65

{variantCount} variants

52 – 300 mm

Drill connection

Recommended accessories that fits this model

Core drill stands

DS 500

Weight (complete product w/o side packed articles)

Drill bit diameter, max

Travel length, max

Column's angling

Slurry and wet vacuums

W 250 P

Air requirement

Rated input power

Slurry rings/collectors

Slurry rings WSR

{variantCount} variants

Dust collectors, Drill motors

Core drill stands

DS 50 Gyro

{variantCount} variants

Weight (complete product w/o side packed articles)

Drill bit diameter, max

Travel length, max

Length, telescopic stanchion

This model fits to these products

Dust extractors

S 26

Rated input power

Slurry and wet vacuums

W 70 P

Air requirement

Rated input power

Related support documents and downloads